Ef60-2-automatic heading machine adopts full hydraulic power driving equipment. All actions are directly pushed by the hydraulic cylinder, including clamping, forming, positioning and die changing. The power source of the equipment is matched with the high-pressure piston pump imported from Japan. The maximum pressure of the hydraulic system can reach 23.5mpa, with stronger working output.
This machine is used to hold the workpiece tightly by clamping die and cold extrude the workpiece by forming die. The feeding position of the workpiece is designed with front and rear positioning, and the switching of the two position forming die is automatically completed through the oil cylinder.
The disassembly actions of the machine include clamping, forming, positioning and mold changing.
Action purpose and principle of automatic heading machine:
1. Clamping (the oil cylinder pushes the clamping die to clamp the workpiece);
2. Forming (the oil cylinder pushes the forming die to cold extrude the product);
3. Positioning (when placing pipe fittings, raise and clamp the pipe fittings and then lower to avoid the forming mold);
4. Mold change (the hydraulic cylinder pushes the fixed plate of the forming mold to realize the switching of different forming molds).